Beneteau First Class 10

Lots of upgrades 2020
£29,995.00
  • Boat REF#  ·  336657
  • LOA  ·  10.40m
  • Year  ·  1984
  • Construction  ·  GRP
  • Underwater profile  ·  Fin
  • Berths  ·  6
  • Engine  ·  1 x Diesel 16hp, 2GM20 (1984)
  • Lying  ·  Gosport
Boatshed Portsmouth
Boatshed Portsmouth
Samantha Cassell

Extra Details

Designer Finot & Faurox
Builder Beneteau Yachts, France
Lying Gosport
Fuel capacity 20.0 ltr (4.4 G) Total - 1 Tanks

Mechanical

Engine 1 x Diesel 16hp
Engine make and model 2GM20 (1984)
Engine Hours Not Recorded
Engine Cooled Indirect
Steering Wheel
Drive Shaft
Prop(s) 2 blade folding
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 5 knots
Max speed (approx) 6 knots

Last engine service June 2023

Dimensions

LOA 10.40m
LWL 9.20m
Beam 2.98m
Draft Min 1.80m
Draft Max 1.80m
Displacement 3,100kg (6,835.5lbs)
Headroom 1.52m
Storage On marina

Rig

Sloop rigged Z Spars Aluminium spars (2020) with stainless steel standing rigging (2020)

Sails

Mainsail - Slab ()
Headsail - Furling ()
Spinnaker gear

She comes with a massive sail locker, owner mentioned they are not quite race ready (aside from the Spinni and Asym).

There are:

3 main sails. The racing sail is in pretty good shape (made by White Sail). The cruising sail is in very good shape (made Kemp Sails a while back but barely used). Believe the other was made by McIntosh and is in pretty good shape (converted from bolt rope to slugs and replaced the foot so it's loose).
7 Genoas/Jibs/Headsails. Don’t get excited here, most of these are old and too big and I think were used before a furler was installed. The race genoa is in fair/good shape. It’s been repaired on the leech. Work done by Kemp. There’s another smaller sail that would be good for heavy wind and is in reasonable shape but has had some repairs.
3 downwind spinnis. One new made by Fareast Sails. This is a masthead spinni. Plus have two old spinnins that are for the fractional sheeve. One is heavier and in reasonable shape but old. The other is light and long in the tooth.
One A2 asym made by Incidence in excellent shape.

Electrical Systems

12 volt battery, 240 shore power voltage, 2 batteries charged by: engine, shore power

Construction

Construction GRP
Underwater profile Fin
Finish Gelcoat finish

Last antifoul May 2024

Accommodation

Total # of berths 6
No. of double berths 2
No. of single berths 2
Cabin(s) 2
Heads 1 heads (Manual)

The vessel is not fitted with a gas system.

2 burner cooker/stove

Accommodation

Cooker/stove
Sink
Manual water system
Non-Smokers

The vessel is not fitted with a gas system.

2 burner cooker/stove

Deck Gear

Sail cover
Warps
Fenders
Instrument Covers

2 halyard winches
4 sheet winches
1 anchors
(8kg Plough)

Nav Equipment

Compass
Speed
VHF DSC radio
Chart plotter
Barometer
Navigation lights
Echo sounder

Safety Equipment

Life buoys
Danbuoy

Broker's Comments

Here is a Beneteau First Class 10, she is a very sleek looking cruiser racer. For a performance yacht she manages to provide a good amount of space whether it be in the cockpit or inside for berths and cabins. She appears to have been well maintained and tidy.

Owner comments:
Since I've owned her, I've replaced the:

Mast (Z-Spars)
Boom (Z-Spars)
Standing rigging (work done by Tate Marine)
Running rigging
All new blocks (Lewmar HTX on all but 2 I believe)
New jib cars (Lewmar)
New main sheet traveller (Lewmar HTX)
New halyards and sheets (most in Marlow dyneema)
Spinnaker Pole (Selden)
Bowsprit (Selden)
Depth transducer
Speed transducer
Toilet

I also have a new downwind spinnaker made by Fareast and a barely used A2 asym made by Incidence.
She comes with a massive sail locker but I won’t say they are race ready (aside from the Spinni and Asym). There are:
3 main sails. The racing sail is in pretty good shape (made by White Sail). The cruising sail is in very good shape (made Kemp Sails a while back but barely used). Believe the other was made by McIntosh and is in pretty good shape (converted from bolt rope to slugs and replaced the foot so it's loose).
7 Genoas/Jibs/Headsails. Don’t get excited here, most of these are old and too big and I think were used before a furler was installed. The race genoa is in fair/good shape. It’s been repaired on the leech. Work done by Kemp. There’s another smaller sail that would be good for heavy wind and is in reasonable shape but has had some repairs.
3 downwind spinnis. One new made by Fareast Sails. This is a masthead spinni. Plus have two old spinnins that are for the fractional sheeve. One is heavier and in reasonable shape but old. The other is light and long in the tooth.
One A2 asym made by Incidence in excellent shape.
She has a Yanmar 20 that was just pulled, serviced, painted, and reinstalled.
The binnacle/wheel was a retrofit by a previous owner. All working fine.
Navigation is Garmin ecomap 50.
Instruments are Raymarine ST60 (wind not working)

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

Owners FAQ's

How long have you owned the boat for?

Since 2019

Why are you selling her?

Not using as often as would like to.

Where have you sailed her?

The Solent

Where the particulars herein give details of a boat, whether new or used, they are intended to give a fair description of the vessel but are not guaranteed as accurate or complete. They shall not form part of any offer or contract for the sale of the vessel. The prospective purchaser is recommended to independently check the particulars and the vessel. The vendor is not selling in the course of a business unless otherwise stated. Personal property is excluded from the sale of the vessel unless specifically included in the listing specification above or in a purchase contract. Personal property may be equipment or gear not permanently attached to the vessel including but not limited to: artwork, entertainment equipment, fishing equipment, TV receivers, recreational equipment, kayaks, tools, and personal appliances. Photos that may incidentally depict owners' personal property do not convey that such items are included in the sale of the vessel unless such items are specifically listed herein. At all times, where the particulars herein give details of a new boat and/or a new boat to be supplied/built by a builder/manufacturer, or a boat to be chartered, via our introduction, we do not guarantee or assume responsibility for the accuracy or reliability of any information offered by third-party companies in respect thereof including without limitation new boat builders/manufacturers, charter companies and/or companies/businesses which are ‘Friends of Boatshed’. We shall not be responsible for, or party to, any transactions, contracts or agreements between you and such third-party providers of products or services and it is incumbent upon you to verify such details direct with such entities and contract with them at your sole discretion and on terms that you agree.